Saint-Gobain Weber Waterproofing
Weber – Integral Waterproofing
Webertec MixIL
Webertec MixIL is a specially designed integral waterproofing additive for cement mortar, plaster and concrete to prevent against water ingress. This additive is compatible with different grade of cement and reacts with the cementitious matrix to provide water repellent properties by improving workability and cohesiveness of mortar and concrete.
Webertec Crete
Webertec Crete is a multi-purpose acrylic emulsion. It can be used in as waterproof slurry coating, slurry bond coat, modifier for concrete repair mortar and also as a modifier for plasters. It can be used for both, internal as well as external applications.
Webertec SBR
Webertec SBR is a styrene-butadiene copolymer latex liquid, with 47% solid content, which can be used as a modifier for concrete/cement mortar, providing them properties, so that they can be used for waterproofing, for repairs of spalled concrete and plaster, as a bonding agent and for high-performance plaster.
Weber – Cementitious Waterproofing
Weberdry Moistseal
Weberdry Moistseal is an easy to use, single-component waterproofing mortar for application of external walls of bathrooms and toilets and concrete walls. weberdry moistseal applied in 2 coats is a SMART active waterproofing barrier which seals the concrete pores and arrests the flow of water in either direction. Its unique properties make it ideal for do-it-yourself waterproofing of toilets and bathrooms, plastered masonry and external walls.
Weber Waterguard
Weber Waterguard is a two-component high-performance acrylic polymer modified flexible cementitious membrane coating for under-tile waterproofing. Ideal for drywall partitions, Weber Waterguard protects the gypsum board, cementitious board, and concrete against water penetration and provides high resistance to the effect of long-term weathering and durable in almost every climatic conditions.
Weber Waterseal
Weberdry Waterseal 321 is a polymer modified cement based 2-component elastomeric waterproof coating applied before tiling in bathrooms, swimming pools, water tanks, terraces, balconies, non-acidic drainage culverts or any other wet area. It can be applied on concrete and masonry surface and has been designed with good crack bridging abilities even after long term water immersion. This also prevents the reinforcements / rebars from corrosion.
Weber – Waterproofing Primer
Weber Primer 401
Weber Primer 401 is a high-performance acrylic based waterproofing primer with excellent bonding agent properties with the substrate, like gypsum board, cementitious board, new and old concrete. It yields into overall strength properties of a waterproofing coating system. It provides high durability to waterproofing coating even if in continuous contact with water.
Weber Primer 501
Weberprim Epox 501 is a transparent, two component epoxy primer with excellent surface wetting and penetrating properties. It can be diluted with water and it is easy to mix and apply with a lambswool roller, rubber wiper or brush. It has excellent adhesion to porous and non-porous substrates. It seals concrete pores.
Weberprim PUR Tile
Weberprim PUR Tile is a transparent, single -component adhesion promoter that chemically activates tiled and glass surfaces providing excellent adhesion to the coating that follows. It is mainly used as an adhesion promoter (primer) for weberdry PUR trans, transparent polyurethane coatings on non-absorbent glazed surfaces like glazed tiles, glass, glass bricks, non-porous stone, etc. It cures by reaction with ground and air moisture.
Weber – Acrylic Waterproofing
Weberdry ACR Seal
Weberdry ACR Seal is a ready-to-use, fibre reinforced elastomeric, super flexible acrylic waterproof coating. It is easy to apply and forms a seamless waterproof barrier which is UV resistant and capable of handling light foot traffic. These properties along with its crack bridging ability make it ideal for waterproofing roofs and terraces, as an exposed waterproofing coat.
Weber – Polyurethane (PU) Waterproofing
Weberdry PUA Seal
Weberdry PUA Seal is a single component liquid applied solvent-free polyurethane-based hybrid waterproofing membrane for indoor and outdoor use. It cures to provide a seamless coating to form a tough, elastomeric membrane. It must be covered by a layer of protective screed or must be embedded in a geotextile membrane.